Skip to content

Arigest team · Infonet Consultores5 min read

Cover with the text «Weighbridge: verification every two years» and the Arigest screen showing the sales delivery note and the weight read from the weighbridge

It is seven in the morning, the first tipper truck stops on the quarry weighbridge, and the weight shown on the display will end up on the delivery note and, at the end of the month, on the invoice to the construction client. That weight is only valid for selling if the weighbridge is verified: Orden ICT/155/2020 (Spanish ministerial order on metrological control of instruments in service) sets a verification every two years for non-automatic weighing instruments, and the owner must request it at least one month before it expires. Below you will find what the regulation says, a table with the deadlines, what happens if the date is missed and how that weight gets onto the delivery note without being retyped.

What the weighbridge does in a quarry

The truck is weighed on the weighbridge. First empty, to get the tare; then loaded, to get the gross weight. The difference is the net weight: the tonnes of crushed stone, gravel or sand that appear on the sales delivery note and are invoiced, so an error on the weighbridge goes straight onto the client's invoice.

Truck loading under the hopper on the weighbridge, with the weighing display and labels showing a tare of 28.00 t, a gross weight of 38.62 t and a net weight of 10.62 t

That is why legal metrology controls these weighbridges. The control of those already in service is set out in a ministerial order worth keeping to hand in the quarry office.

Which regulation governs weighbridge verification

The one that matters to you is Orden ICT/155/2020 (BOE-A-2020-2573), amended by Orden ITU/1475/2024. It regulates the metrological control of instruments in service and, for non-automatic weighing instruments, sets a periodic verification carried out by an authorised metrological verification body.

First of all, check your weighbridge's documentation: it shows when it last passed verification. That date is the one that counts, because the two years until the next one are counted from it. Look in the certificate and on the label for the word the regulation uses: verified ("verificada").

How often it is verified and who requests it

The authorised body carries out the verification, but the one who has to take action is the weighbridge owner, that is, the company that uses it to sell. This table summarises what Orden ICT/155/2020 says in its current wording:

SituationWhat the order saysWhat you need to do
Periodic verificationEvery two years for non-automatic weighing instrumentsKeep a note of the date of the last verification
RequestThe owner requests it electronically at least one month before expiryRequest it from an authorised metrological verification body well in advance
Deadline passed without verificationIt cannot be used for commercial transactions until it passes verificationDo not sell by weight with that weighbridge until it has been verified
Verification passedA label is affixed and the certificate arrives within 10 days at mostKeep the certificate and leave the label visible
Repair or modificationIt must be verified againRequest verification after the work has been done
You must request weighbridge verification at least one month before the two years are up, electronically. If it expires without being passed, the weighbridge cannot be used for commercial transactions until it passes.

What happens if the verification date is missed

Once the deadline has passed, according to the order, the weighbridge cannot be used for commercial transactions until it passes verification. If you sell by the tonne at your quarry, the sale depends on that weight, so the day the weighbridge falls out of date the problem hits the weighbridge, the delivery note and the invoice all at once.

That is as far as the regulation goes. For a question about your specific case, for example how to count the deadline if the last verification was delayed, ask the authorised metrological verification body you plan to request it from: they carry it out and will give you the right date.

After a repair or a change to the weighbridge

In addition to the two-year schedule, the order requires the weighbridge to be verified after a repair or modification, even if the previous verification is still within its deadline. Once the technician has worked on the weighbridge, request verification before weighing for sales again.

What it is worth keeping in the office

  • The certificate of the last verification, which arrives within 10 days at most after passing it.
  • The verification label, visible on the weighbridge.
  • The proof of the electronic request, with its date.
  • The reports of any repair or modification, so you know when a new verification was needed.
  • The next expiry date in the calendar of whoever handles administration, with a reminder set one month earlier.

From the weighbridge to the delivery note without typing the weight

Once the weighbridge is verified, that weight still has to reach the delivery note exactly as it appears on the display. When the weighbridge operator writes it down by hand and it is retyped in the office, every copy is a chance to get a figure wrong, and that figure is later invoiced. Arigest reads the weight from the weighbridge through the RS-232 serial port (it is designed for the Sorribes S-400 in continuous output): the tare, gross weight and net weight pass to the delivery note, which is generated automatically.

Sales delivery note for aggregates in Arigest with client, site, truck, haulage company and driver, tare, gross weight and total weight read from the weighbridge, weighing display showing 038620 kg and item washed sand 0-5

Invoices are issued from those delivery notes, with or without delivery notes, and invoicing complies with article 29.2.j of Ley 58/2003, General Tributaria (Spain's General Tax Act), and the RRSIF (Spanish regulation on invoicing software systems). For when the invoicing office is not next to the weighbridge, Arigest has four working modes: direct reading at the plant, a background capture module, import of delivery notes at the office, and plant and office synchronised. It is explained on the page about connecting Arigest to the weighbridge and, at the level of cable and parameters, in the article on how to connect a weighbridge to a computer via RS-232.

If at your quarry the weighbridge weight is still copied by hand onto the delivery note, request a demo of Arigest and we will show you how the weighbridge ticket passes to the delivery note and the invoice.

What to do now about your weighbridge

  1. Find the certificate and label of the last verification and note when the two years are up.
  2. Set a reminder at least one month before expiry and request verification electronically from an authorised metrological verification body.
  3. Check how the weight reaches the delivery note and what data it carries: the article on the data an aggregates delivery note must include and the overview of Arigest features for an aggregates plant will help.

To get your weighbridge's verified weight onto the delivery note and the invoice without typing it, request information or a demo of Arigest, call +34 959 54 07 12 or message us on WhatsApp at +34 621 39 39 47.

More articles from the blog

See all

Request information

So that we can get in touch, please fill in the form below.